Novas Postagens :

TP-Link TL-WR541G


Port Forwarding Age of Empires II on the TP-Link TL-WR541G

To setup port forwarding on this router your computer needs to have a static ip address. 
Try our free PF Setup Static IP Address Program which will setup a static ip address for you. 

Or you can take alook at our Static IP Address guide to setup a static ip address. When you are finished setting up a static ip address, please come back to this page and enter the ip address you setup in the Static IP Address box below. 

Do not skip this step!

192.168.1.
TL-WR541G
Open a web browser like Internet Explorer or Firefox. Enter the internal IP address of your router in the address bar of your browser. If you do not know your routers internal IP address please read our How To Find Your Routers IP Address guide. 

In the picture above the address bar has http://www.google.com in it. Just replace all of that with the internal IP address of your router. By default the IP address should be set to 192.168.1.1.
TL-WR541G
You should see a box prompting you for your username and password. Enter your username and password now. By default both the username and password are admin. Click the Ok button to log in to your router. 

Please visit our Default Router Passwords page if the username and password shown above do not work for you.
TL-WR541G
Click the Forwarding link near the left of the page.
You should now see a new menu. In this new menu, click Virtual Servers.
TL-WR541G 



Entry #1

We will list a series of lines here that will show you exactly how to forward the ports you need to forward. Age of Empires II requires you to forward the following ports: 2300-2400,47624. Go ahead and enter the settings shown above into the Virtual Servers menu.
IDService PortIP AddressProtocolEnable
1192.168.1.




Entry #2

You should see another page of settings that need to be entered into one of the blank lines on your routers Virtual Servers page. Go ahead and enter those settings now.
IDService PortIP AddressProtocolEnable
2192.168.1.
When you're finished, click Save near the bottom of the screen to save your changes. 

And that's it! You're done!

To test if your port has been properly forwarded, you can use our Port Checker tool.
Didn't find the screenshot you were looking for? Check our our giant collection of router screenshots.
Compartilhe Este Artigo :

Postar um comentário

 
Copyright © 2013 - EcomRepair - All Rights Reserved - Proudly powered by Blogger